Can I edit this SaunaLife G2 model?
Yes. Use the editable-design link in the interactive showcase to open the same G2 geometry in SaunaDesignPro.
SaunaLife Garden Series showcase
SaunaLife G2 interactive 3D showcase
Inspect the SaunaLife G2 outdoor sauna kit in an interactive, manual-matched 3D model, then open the live Sauna Marketplace listing or continue with the editable design.
View the G2 at Sauna MarketplaceOpen the editable G2 design
The G2 is modeled as the factory kit is built: a single 42 mm layer of interlocking Nordic Spruce wall beams, a sloped EPDM roof, a clear tempered-glass door, and the complete three-piece Aspen bench layout.
Switch between exterior, top, and interior views or use the layer controls to inspect the finished shell and construction. The linked editable SaunaDesignPro model preserves the same source-controlled geometry.
A source-controlled model of the factory kit
The showcase follows the current SaunaLife G2 installation manual and dimension drawing. Wall and ceiling geometry, door placement, roof envelope, backrests, and the lower L-shaped bench return are represented as supplied instead of being approximated as a conventional framed sauna.
AIR Perfect placement is a fit study
The model includes a Saunum AIR Perfect 7 placement study. It is not installation approval: the G2 low ceiling is 75.46 in, while Saunum publishes a 77 in minimum room height. Obtain written manufacturer confirmation for the exact kit and placement before ordering or installing the heater.
Frequently asked questions
Where can I buy the SaunaLife G2?
The showcase links directly to the current SaunaLife G2 product page at Sauna Marketplace.